Hi,
Any advise on this type of encoder - Renco ENCODER RS25D-1000-3/8-5-LD0M1
I have look online but unable to find any info on this type of encoder.
Please check attached image of encoder.
Thanks
Regards
Manni
Haas VF-1 1994 Retrofit to Centroid Allin1DC - Spindle Encoder
Moderator: cnckeith
-
- Posts: 3072
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Spindle Encoder
Just a quick guess that it's a 1000 line 5V line driver encoder with a 3/8" shaft. You'd have to check the Renco website to be sure.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Spindle Encoder
If the MS connector is a 10-pin 18-1 pattern, then there is a reasonable chance that it is a differential encoder, and uses the same pin-out as a US Digital HD25 or Koyo TRDA-25 model.
See https://cdn.usdigital.com/assets/datash ... 7600845398
and https://cdn.automationdirect.com/static ... series.pdf
See https://cdn.usdigital.com/assets/datash ... 7600845398
and https://cdn.automationdirect.com/static ... series.pdf
-
- Posts: 25
- Joined: Sun Jan 24, 2021 2:58 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Walsall - UK
- Contact:
Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Spindle Encoder
Thank you tblough & cncsnw,
The TRDA-25 model was the perfect match.
The TRDA-25 model was the perfect match.