Eurotherm VFD

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Ozyrob
Posts: 20
Joined: Wed Sep 02, 2020 4:31 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900880
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Eurotherm VFD

Post by Ozyrob »

Hi All,

I'm in the process of trying to sort the wiring for my Eurotherm 584 s VFD. Has anybody wire one of these to the Allin1DC? It would be great together any advice, the wiring is a bit confusing compared to the print. Any parameter settings would be helpful as well.

Thanks

Rob

https://www.parker.com/literature/SSD%2 ... 389756.pdf
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Eurotherm VFD

Post by martyscncgarage »

I have not personally used it. I usually follow the manual, look for sample wiring diagrams, read parameter settings and give it a go
You will need to know which terminals are:
Analog Input
Analog Com
Digital input Com
Digital Input for Forward
Digital Input for Reverse
Digital Input for DRIVE RESET

Dry contact output programmed for VFD Fault
One contact will go to All in One COM
the other to Spindle Fault input on All in one

You can always call the manufacturer and tell them you need the above inputs and outputs and ask them to suggest what needs to be done and what parameters need to be changed.

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Ozyrob
Posts: 20
Joined: Wed Sep 02, 2020 4:31 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900880
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Eurotherm VFD

Post by Ozyrob »

Thanks Marty
I've send them an email.
Thanks for all your work on YouTube, if it wasn't for you I would have never taken on something like this.
Rob
Ozyrob
Posts: 20
Joined: Wed Sep 02, 2020 4:31 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A900880
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Eurotherm VFD

Post by Ozyrob »

Has nobody used Eurotherm. I'm still waiting for a reply from Erotherm, I don't like my chances.

Rob
Post Reply