I have three as -new lathe spindles with A2-5 spindle nose:
$69 Shipped USPS Priority in the US
Suggested bearing and seal: Timken 30210, Timken 30210M-90KM1, SKF seal 563033 (CR23465)
AS-IS where is. Email me for more information
PayPal Accepted, reasonable offers considered.
If interested, email me directly
martyscncgarageATgmailDOTcom or PM me.
A2-5 Lathe Spindles
Moderator: cnckeith
-
martyscncgarage
- Posts: 7962
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Location: Mesa, AZ
A2-5 Lathe Spindles
- Attachments
-
-
-
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
martyscncgarage
- Posts: 7962
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Location: Mesa, AZ
Re: A2-5 Lathe Spindles
Bump....
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
Rs1626
- Posts: 3
- Joined: Sat Feb 13, 2021 12:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
Re: A2-5 Lathe Spindles
Is there internal taper?
No sir. A2 spindle used a nose adapter.
No sir. A2 spindle used a nose adapter.
-
cody.farr
- Posts: 2
- Joined: Wed Mar 24, 2021 9:40 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
Re: A2-5 Lathe Spindles
I will take one if you have it
thanks Cody
thanks Cody
-
martyscncgarage
- Posts: 7962
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Location: Mesa, AZ
Re: A2-5 Lathe Spindles
Still have a couple left.
PM me Cody
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ