Hi
Can i used MPU11 for centroid software(CNC10) ?
Thank you
S.M.L
**RESOLVED** Can The MPU11 Run Centroid CNC10 Software?
Moderator: cnckeith
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: MPu11 version 3.0
Hello. the Mpu11 and the CNC10 have their own unique versions of CNC software. Both can be found on our website.
http://www.ajaxcnc.com/tech/downloads/software/
the current version for cnc10 is v2.66
the current version for MPU11 is v3.0
http://www.ajaxcnc.com/tech/downloads/software/
the current version for cnc10 is v2.66
the current version for MPU11 is v3.0
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Re: MPu11
Hi SML,
Yes, you can use Centroid software on an MPU11 system. The latest generation Centroid software which runs on MPU11 systems is actually called CNC11 but it is functionally and visally equivalent to CNC10 -plus it offers several new features over the older CNC10 software!
These features are all included as standard when you purchase the CNC11* software ($500) to go with your MPU11 hardware:
*Requires soon to be released CNC11 v3.1 Note: All MPU11 users have access to free software upgrades when a new version is released.
Yes, you can use Centroid software on an MPU11 system. The latest generation Centroid software which runs on MPU11 systems is actually called CNC11 but it is functionally and visally equivalent to CNC10 -plus it offers several new features over the older CNC10 software!
These features are all included as standard when you purchase the CNC11* software ($500) to go with your MPU11 hardware:
- Intercon -Conversational Programming Software
- 4MB Standard file size*
- Multiple Work coordinate systems - G54-G59*
- Sub Programs and Macros*
- S Function for Programmable Spindle Speed*
- Compression Tapping*
- Drilling Cycles*
*Requires soon to be released CNC11 v3.1 Note: All MPU11 users have access to free software upgrades when a new version is released.
Re: MPu11
Thanks Scott
Please sent for me a demo of cnc11 v3.1 to below email address if you have.
semalocnc@mail.com
Thank you
Please sent for me a demo of cnc11 v3.1 to below email address if you have.
semalocnc@mail.com
Thank you
Re: Can The MPU11 Run Centroid CNC10 Software?
SML,
As mentiond in this post: http://www.ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=12
You can download the current version of our demo software. I don't have a demo of the latest CNC11 but the current demo is visually and functionally equivalent to what you will see in CNC11.
As mentiond in this post: http://www.ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=12
You can download the current version of our demo software. I don't have a demo of the latest CNC11 but the current demo is visually and functionally equivalent to what you will see in CNC11.
Re: Can The MPU11 Run Centroid CNC10 Software?
Ok
Thank you Scott
Thank you Scott