https://vm.tiktok.com/ZMeeVW9FW/
This is 1st no load test.
https://vm.tiktok.com/ZMeeVtmkT/
Mechanical build
https://vm.tiktok.com/ZMeeqemc1/
Pawn with 1/4” clearance on z and x for a no crash outcome
I know the pawn was not completed but as you will see the results with those sanding done it was pretty awesome!
Mx-210V 8x16” lathe closed loop ihss57 steppers
Moderator: cnckeith
-
- Posts: 2
- Joined: Fri Feb 05, 2021 4:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: c147357
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Mx-210V 8x16” lathe closed loop ihss57 steppers
That was supposed to read without sanding.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Mx-210V 8x16” lathe closed loop ihss57 steppers
Nice work!
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ