I really like the flexibility of the Anamet MTC conduit Centroid uses on their kits but I have not been able to locate anyplace that sells it in less than 100' rolls. Has anyone else seen this anywhere you can buy it by the foot? Centroid - do you sell this to the DIY community?
Thanks,
Tom
Anamet Anaconda MTC Conduit <<Answered>>
Moderator: cnckeith
-
- Posts: 3174
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Anamet Anaconda MTC Conduit <<Answered>>
Last edited by tblough on Thu Jan 04, 2018 5:49 pm, edited 2 times in total.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 436
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Anamet Anaconda MTC Conduit
Are you looking for just the conduit or the conduit with end connectors? Our standard console extension 6' conduit (no cables inside) with end connectors is $115.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Anamet Anaconda MTC Conduit
Not exactly the same, but very flexibie:
https://www.mcmaster.com/#standard-elec ... t/=1992y67
https://www.mcmaster.com/#standard-elec ... t/=1992y67
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 3174
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Anamet Anaconda MTC Conduit
Thanks, Liviu and Marty. I was looking for 3/4" Anaconda not the 1.25" console extension and I did find a place that will sell by the foot. West Side Electric Supplyin South Elgin, Illinois has all the sizes sells cut lengths. For anyone who is building a CNC machine, Anamet Anaconda M.T.C. conduit is the most flexible metallic conduit I have ever found. It is even more flexible than most non-metallic conduit (even more flexible that McMaster's flex-rated non-metallic offering, Marty) and being made for machine tools is oil-resistant.
Here's the manufacturer's web page on the product - http://flexiblewiringconduits.anacondas ... nduit-lfmc
Cheers,
Tom
Here's the manufacturer's web page on the product - http://flexiblewiringconduits.anacondas ... nduit-lfmc
Cheers,
Tom
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.