@Tory if you're using a router and doing 2.5D stuff you could use something like this:
https://www.getfabber.com/#demo
It's about as automatic as you can get, but you can also go in and fool with the settings if you want.
Cam software recommendations for Centroid
Moderator: cnckeith
-
- Posts: 194
- Joined: Sun Sep 20, 2020 7:34 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0035FF8FEB5F-0708203490
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Cam software recommendations for Centroid
I am surprised that Centroid isn't working on software that could input a 3d model and it spits out G-code. Maybe it could automatically input into Intercon and with a few teaks the operator could have G-code.
-
- Posts: 199
- Joined: Mon Oct 29, 2018 5:25 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Cam software recommendations for Centroid
Fabber already has a Centroid post!
But I would love a more direct input, something that would eliminate the need to download the G Code and send it to Centroid
But I would love a more direct input, something that would eliminate the need to download the G Code and send it to Centroid