hello everyone. i just upgraded my m15 to a new allin1 dc. i do not have my serial number from under the cover but do not think it is relevant to this question.
i am trying to set up my notepad++ per the tech bulletin and the associated youtube video from centroid.
i have followed every step to the T.
i unzipped the documents to my cncm folder.
i changed the compile.mill.txt to compile.cmd
and when i try to execute the compile.cmd and it says file not found.
do i need to point notepad++ to my cncm folder? if so, how do i do that?
thx
help with setting up notepad++ for plc compiling
Moderator: cnckeith
-
- Posts: 78
- Joined: Tue Apr 17, 2018 8:58 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: help with setting up notepad++ for plc compiling
You need to open a PLC file from the cncm directory.
-
- Posts: 11
- Joined: Fri Nov 06, 2020 2:56 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: help with setting up notepad++ for plc compiling
can you point me to the instructions on how to do that in notepad++? as you can see in the picture i had the instructions open and was following them. i do not know how to select a directory in notepad++. i just did what was on the instructions and never saw an option to select a certain directory.
-
- Posts: 78
- Joined: Tue Apr 17, 2018 8:58 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: help with setting up notepad++ for plc compiling
Place the PLC program in the CNCM directory, open with notepad++
Here is more information:
https://www.youtube.com/watch?v=7WiEJiQ ... i2WKIedQlQ
Here is more information:
https://www.youtube.com/watch?v=7WiEJiQ ... i2WKIedQlQ