#3 Drive Fault

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cgspecialmachine
Posts: 1
Joined: Wed Nov 04, 2020 4:42 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: 0008DC111213-0921201013
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

#3 Drive Fault

Post by cgspecialmachine »

I am setting up a new Oak with AutomationDirect SVA-2100. I can't get pass #3 Drive Fault s error. I've swapped the encoder cables on the Oak and the error stays on #3.
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: #3 Drive Fault

Post by tblough »

Is it wired correctly?
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
cncsnw
Posts: 3764
Joined: Wed Mar 24, 2010 5:48 pm

Re: #3 Drive Fault

Post by cncsnw »

A common error is to forget to connect 24VDC to H2.

To guess at anything beyond that, we would have to see a Report; some pictures (of the wiring and of the Alt-i screen); and the wiring diagrams.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: #3 Drive Fault

Post by martyscncgarage »

cgspecialmachine wrote: Wed Nov 04, 2020 4:52 pm I am setting up a new Oak with AutomationDirect SVA-2100. I can't get pass #3 Drive Fault s error. I've swapped the encoder cables on the Oak and the error stays on #3.
I moved this post from the Acorn forum
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply