#3 Drive Fault
Moderator: cnckeith
-
- Posts: 1
- Joined: Wed Nov 04, 2020 4:42 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0008DC111213-0921201013
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
#3 Drive Fault
I am setting up a new Oak with AutomationDirect SVA-2100. I can't get pass #3 Drive Fault s error. I've swapped the encoder cables on the Oak and the error stays on #3.
-
- Posts: 3096
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: #3 Drive Fault
Is it wired correctly?
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Re: #3 Drive Fault
A common error is to forget to connect 24VDC to H2.
To guess at anything beyond that, we would have to see a Report; some pictures (of the wiring and of the Alt-i screen); and the wiring diagrams.
To guess at anything beyond that, we would have to see a Report; some pictures (of the wiring and of the Alt-i screen); and the wiring diagrams.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: #3 Drive Fault
I moved this post from the Acorn forumcgspecialmachine wrote: ↑Wed Nov 04, 2020 4:52 pm I am setting up a new Oak with AutomationDirect SVA-2100. I can't get pass #3 Drive Fault s error. I've swapped the encoder cables on the Oak and the error stays on #3.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ