First Titaniun cutting after acorn retrofit project

Post your completed retrofits for the world to see.

Moderator: cnckeith

rflopes3
Posts: 65
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 2752
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

First Titaniun cutting after acorn retrofit project

Post by rflopes3 »

hey guys.

Finally back to work on my knives.

The machine never been so smooth and precise.

Special rhanks go Mr Marty who had help me a lot

Image
Attachments
20200607_164830.jpg
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: First Titaniun cutting after acorn retrofit project

Post by cnckeith »

cool! thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
AnnArborNate
Posts: 62
Joined: Mon Jun 29, 2020 6:18 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: First Titaniun cutting after acorn retrofit project

Post by AnnArborNate »

Excellent.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: First Titaniun cutting atter acorn retrofit project

Post by martyscncgarage »

rflopes3 wrote: Sun Jun 07, 2020 3:50 pm hey guys.

Finally back to work on my knives.

The machine never been so smooth and precise.

Special rhanks go Mr Marty who had help me a lot

Image
Thanks for sharing! Would like to see one of your knives done!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: First Titaniun cutting after acorn retrofit project

Post by martyscncgarage »

rflopes3 wrote: Sun Jun 07, 2020 3:50 pm hey guys.

Finally back to work on my knives.

The machine never been so smooth and precise.

Special rhanks go Mr Marty who had help me a lot

Image
Thanks for sharing! Would like to see one of your knives done! (I'm assuming that's what the part is for? :D )
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
rflopes3
Posts: 65
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 2752
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: First Titaniun cutting after acorn retrofit project

Post by rflopes3 »

This is the knife ready.

That part was the frames.
Attachments
20200731_081619.jpg
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: First Titaniun cutting after acorn retrofit project

Post by martyscncgarage »

rflopes3 wrote: Tue Sep 15, 2020 10:56 am This is the knife ready.

That part was the frames.
Very nice work!
You sell them on line?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
rflopes3
Posts: 65
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 2752
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: First Titaniun cutting after acorn retrofit project

Post by rflopes3 »

martyscncgarage wrote: Tue Sep 15, 2020 10:56 am
rflopes3 wrote: Tue Sep 15, 2020 10:56 am This is the knife ready.

That part was the frames.
Very nice work!
You sell them on line?
Marty
Yes I do but only on demand. usually I don't have knives ready to ship. The wait list is now 3 to 4 months.

Look at my instagram @t.rex_custom_knives
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: First Titaniun cutting after acorn retrofit project

Post by martyscncgarage »

👍👍
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: First Titaniun cutting after acorn retrofit project

Post by CNCMaryland »

Beautiful work !!!
Post Reply