Very cool! Thank you for sharing your experience!
Marty
First 3D Carvings
Moderator: cnckeith
-
- Posts: 9917
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: First 3D Carvings
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 53
- Joined: Fri Mar 30, 2018 8:59 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: MPU12 serial number: 74E18275EB48-0914181220
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: First 3D Carvings
Hi All
I got the flag done, haven't given it to him yet.
Here are the finished pics, 3 coats semi gloss poly ,a alum french cleat to hang it with.
and a torched accent.
I also put 2 recessed magnets on the back of the badge and flag to hold the badge to the flag
The flag is made from a left over chunk of an LVL beam (laminated veneer lumber ).
Ripped to 1/2 x 1 1/2 strips
Todd
I got the flag done, haven't given it to him yet.
Here are the finished pics, 3 coats semi gloss poly ,a alum french cleat to hang it with.
and a torched accent.
I also put 2 recessed magnets on the back of the badge and flag to hold the badge to the flag
The flag is made from a left over chunk of an LVL beam (laminated veneer lumber ).
Ripped to 1/2 x 1 1/2 strips
Todd
Engineering Hell: Everything's right and nothing works.
If everything's right and nothing works, check your assumptions.
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 9917
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: First 3D Carvings
Nice!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 53
- Joined: Fri Mar 30, 2018 8:59 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: MPU12 serial number: 74E18275EB48-0914181220
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: First 3D Carvings
Hey all
Here is a live edge sign I made no 3D carving but the torched finished ,I think came out pretty good.
Here is a live edge sign I made no 3D carving but the torched finished ,I think came out pretty good.
Engineering Hell: Everything's right and nothing works.
If everything's right and nothing works, check your assumptions.
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
(Note: Liking will "up vote" a post in the search results helping others find good information faster)