both my probes are permanently wired (I have a wifi Renishaw RMP-60 with the RMI-Q receiver for TP and a mainstream chinese toolsetter) ,
so i have not connected the probe detect signals ,
as you mentioned , the probing and tool setting works fine without it.
I have a wifi Renishaw RMP-60 with the RMI-Q receiver for TP and a mainstream chinese style toolsetter.
The renishaw requires a special tool holder to use it¨s probe detect function , which i do not have .
Acorn CNC12 version 4.5 has been released!
Moderator: cnckeith
-
- Posts: 43
- Joined: Fri Jul 05, 2019 3:41 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: none
-
- Posts: 2993
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: Acorn CNC12 version 4.5 has been released!
you can rig up a manual switchknastenrad wrote: ↑Mon Jul 20, 2020 8:54 pm both my probes are permanently wired (I have a wifi Renishaw RMP-60 with the RMI-Q receiver for TP and a mainstream chinese toolsetter) ,
so i have not connected the probe detect signals ,
as you mentioned , the probing and tool setting works fine without it.
I have a wifi Renishaw RMP-60 with the RMI-Q receiver for TP and a mainstream chinese style toolsetter.
The renishaw requires a special tool holder to use it¨s probe detect function , which i do not have .
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 13
- Joined: Sat May 30, 2020 2:14 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: oc1c5713ac92-0522203322
Re: Acorn CNC12 version 4.5 has been released!
I am testing Rev 11 Router setup. Is there a way to set plate thickness on the Auto Z to plate function?
-
- Posts: 2993
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: Acorn CNC12 version 4.5 has been released!
please post beta software questions and comments in the beta software thread
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 95
- Joined: Wed Feb 20, 2019 9:31 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 78047384ad00-0221191675
Re: Acorn CNC12 version 4.5 has been released!
I saw on the Acorn sales page the Router version. Is that a new purchase item or is it an option for previous owners. Sorry. Haven’t been on the forum in a while.
-
- Posts: 2993
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: Acorn CNC12 version 4.5 has been released!
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 95
- Joined: Wed Feb 20, 2019 9:31 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 78047384ad00-0221191675
Re: Acorn CNC12 version 4.5 has been released!
Thank you. So what about a new Acorn version that allows a slaved Y and a 4th axis. 

-
- Posts: 1263
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - Location: Boston, MA
- Contact:
Re: Acorn CNC12 version 4.5 has been released!
It already has that. It's called hardware pairing.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 95
- Joined: Wed Feb 20, 2019 9:31 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 78047384ad00-0221191675
Re: Acorn CNC12 version 4.5 has been released!
Yea I know that very well. I’m talking about separate slaving for gantry squaring auto setup and then the 4th axis.so let’s not play and talk around the intent and let’s see Centroid give us a better setup. Really like what we have. But soon I want to do a 4th axis.
-
- Posts: 2993
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: Acorn CNC12 version 4.5 has been released!
would need to create a new product for that with more drive ports, suggestions for product name?
Acorn-6? Acorn Six Pack?
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)