Takeoff Motors, Drives, Power Supplies, etc For Sale

Moderator: cnckeith

Post Reply
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by Gary Campbell »

Many of you know I retrofit imported machines and upfit them for specialty use. That means I am left with a good number of unused electronic parts that I have no use for. If you are looking to get into a self build, these parts may save you some bucks. All of these parts have actually been tested for a few minutes before removal. Unpictured I have a number of switches, fuses, contactors, etc. Prefer to sell quantities around 50% of current pricing and give another 20% on 4 or more (or 5 for the price of 4)

I can customize any or all of these, bore pulleys, machine ballscrews, program drives, supply wiring harnesses , whatever is needed at extra cost, of course.

I accept credit cards or PayPal. I will box and weigh and add shipping costs added at the time of shipping.

Here is a list:
~630 ozin NEMA34 motors (14mm shaft) $40 Buy more than 5, $30 each
DMA860H Stepper Drives (7.2A, AC/DC) Buy a motor & drive, I'll throw in motor wires
Inductive (3 wire) Limit/Home Sensor 3 for $10
Motor Wires 18ga, 15 to 20 ft long $5 each
70 volt AC 1200w power supply $50 each
2.2kw water cooled spindle, wire and VFD 230v single phase input Preprogrammed $250

Contact Gary at GCnC411@gmail.com for more info or to purchase
Attachments
DSC00444.JPG
DSC00443.JPG
DSC00442.JPG
DSC00441.JPG
DSC00440.JPG
DSC00439.JPG
DSC00438.JPG
DSC00437.JPG
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by Gary Campbell »

All that remains are 2 power supplies and 6 motors
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by Gary Campbell »

I am refreshing this thread as I have "the goodies" from at least 3 more machines. 4, 6 & 8A drives. ~600 & 900ozin motors. AC & DC power supplies. 3hp (18k) & 5hp (24k) WC spindles with matching VFDs'. Spindle wires, motor wires. Breakers, fuses terminal blocks... list goes on and on.

I also have a closed circuit (radiator, pump, reservoir, digital flow & temp display with fittings and tubing) cooling kit for the watercooled spindles.

Prices are right, first come, first served. email GCnC411@gmail.com
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
pbirchfield
Posts: 1
Joined: Thu Mar 12, 2020 12:02 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn333
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by pbirchfield »

My name is Paul I'm from Florida I got a Mill port
10 by 50 knee Mill I'd like to convert it into CNC I have a acorn bored never run nothing c&c this is my first time trying to do most of it myself I'm just looking around for parts and bracket kits and stuff for the motors
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by Gary Campbell »

Paul...
Most of this lot are off routers, other than the motors and a few other components, not much would be applicable to a mill.
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Rosmadi
Posts: 99
Joined: Tue Nov 06, 2018 3:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 74E1829315CC-0907181194
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by Rosmadi »

😳
mghood
Posts: 9
Joined: Fri Jun 26, 2020 3:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: C143226
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by mghood »

Do you still have any proximity switches? I'm looking for npn normally closed. I need 8 each
martin
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by Gary Campbell »

mghood wrote: Mon Aug 17, 2020 2:15 pm Do you still have any proximity switches? I'm looking for npn normally closed. I need 8 each
martin
Sorry, No
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Takeoff Motors, Drives, Power Supplies, etc For Sale

Post by Gary Campbell »

It may have gotten lost, but I still have one each 2.2kw (3hp) and 3.7kw (5hp) water cooled spindles remaining cheap. VFD's available.

Note: These are not "new in box", but they are unused takeoffs from upgraded machines

Spindles have all been sold
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Post Reply