STEPS/revolution

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

wagdamotta
Posts: 41
Joined: Tue Jun 18, 2019 7:34 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: STEPS/revolution

Post by wagdamotta »

Hi To All

Marty, do you think is okay to install the switch for turn off the power in the servo drive before turn the main power off, I don't know If is right to do, you and lot of people not have this problem, DMM told me to install the switch, but I not want.
Please let me know If is okay for me install the switch or get new servos.

Thank you
Wagner Damotta
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: STEPS/revolution

Post by martyscncgarage »

wagdamotta wrote: Sat Sep 21, 2019 8:54 pm Hi To All

Marty, do you think is okay to install the switch for turn off the power in the servo drive before turn the main power off, I don't know If is right to do, you and lot of people not have this problem, DMM told me to install the switch, but I not want.
Please let me know If is okay for me install the switch or get new servos.

Thank you
Wagner Damotta
You could try an Estop relay.
Use output 1, set it up as NoFault, have it drive a larger relay that opens power to the drives. Just before you power down hit the Estop button, which removes power from the drives. Then power down the control.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
wagdamotta
Posts: 41
Joined: Tue Jun 18, 2019 7:34 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: STEPS/revolution

Post by wagdamotta »

Thank you
I will try, If I need you can make a diagram show how I connect?
Thank you
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: STEPS/revolution

Post by martyscncgarage »

Sure
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
wagdamotta
Posts: 41
Joined: Tue Jun 18, 2019 7:34 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: STEPS/revolution

Post by wagdamotta »

Hi Marty
I think in buy a FRYER CNC machine is in good condition and change the control for centroid acorn cnc 12. this modification is possible?
My PM25 is working great, i make some parts, thank you for all the help that i got from you and from centroid.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: STEPS/revolution

Post by martyscncgarage »

wagdamotta wrote: Wed Jun 09, 2021 10:43 pm Hi Marty
I think in buy a FRYER CNC machine is in good condition and change the control for centroid acorn cnc 12. this modification is possible?
My PM25 is working great, i make some parts, thank you for all the help that i got from you and from centroid.
Were glad to have helped.
Post a New Topic with pictures and details about the Fryer
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply