fusion 360
Moderator: cnckeith
-
ArtG
- Posts: 13
- Joined: Thu Apr 04, 2019 1:27 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Glendale, AZ
Re: fusion 360
I don't recommend using the Sample tool Library for Fusion 360. Samples can change and you do not want that. You should un-check the Sample library so that they do not show when creating a CAM or Manufacturing operation. It is ok to use the sample to create a new tool and then modify it to fit the actual tool you have. Place it into your local tool library or if you have multiple computers or mills, set up the cloud library. There are a lot of videos by Lars and NYCNC on the tools library functions and uses.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)