root element wizard

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Dholman
Posts: 52
Joined: Mon Aug 06, 2018 11:44 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

root element wizard

Post by Dholman »

mill was running fine was setting up rigid tap went to open wizard and will not open all i get is root element missing machine has no internet connection here is my report after it started this
Attachments
report_780473845840-0206191632_2019-05-31_10-56-32.zip
(317.94 KiB) Downloaded 76 times

Top
cnckeith
Site Admin
Posts: 8941
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: root element wizard

Post by cnckeith »

sounds like a file got moved or corrupted on you PC.
I would ...run the cnc12 v4.18 installer and then in cnc12...F7 Util menu, "Restore Report" navigate to the report you just posted here (most latest).. shut down, reboot. and give it a try
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”