When I press cycle starts everything is cleared and press cycle start appears again.
https://youtu.be/7TedeUdYK1I
Using Geckodrive G540
Software problem
Moderator: cnckeith
-
Kutton
- Posts: 86
- Joined: Tue Jan 01, 2019 2:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Software problem
Last edited by Kutton on Sat Apr 06, 2019 5:25 pm, edited 1 time in total.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Gary Campbell
- Posts: 2354
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Software problem
Include a report and screen snips showing your wizard settings. Page 1 for sure. Also include a snip of your IO live (Press Alt + I)
Or simply scroll up on the message box and see what is still triggered
Or simply scroll up on the message box and see what is still triggered
GCnC Control
CNC Control & Retrofits
CNC Depot Modular ATC kits
https://www.youtube.com/user/Islaww1/videos
CNC Control & Retrofits
CNC Depot Modular ATC kits
https://www.youtube.com/user/Islaww1/videos
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Kutton
- Posts: 86
- Joined: Tue Jan 01, 2019 2:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Software problem
Here are photos. Will send backup at a later date when I find it.
- Attachments
-
- report_f045da76bcca-0102191506_2019-04-06_17-33-46.zip
- (200.68 KiB) Downloaded 107 times
-
-
-
-
-
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Gary Campbell
- Posts: 2354
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Software problem
You must have an estop configured. Even if it doesn't exist and is set to NO
GCnC Control
CNC Control & Retrofits
CNC Depot Modular ATC kits
https://www.youtube.com/user/Islaww1/videos
CNC Control & Retrofits
CNC Depot Modular ATC kits
https://www.youtube.com/user/Islaww1/videos
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Kutton
- Posts: 86
- Joined: Tue Jan 01, 2019 2:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Software problem
Ok
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
martyscncgarage
- Community Expert
- Posts: 9946
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Software problem
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Kutton
- Posts: 86
- Joined: Tue Jan 01, 2019 2:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Software problem
Machine doesn’t run at this time.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Kutton
- Posts: 86
- Joined: Tue Jan 01, 2019 2:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Software problem
Watched and set controller as per Bench Test Running Motor.
Dose estop have to be wired to acorn to make light on G540 to change to green?
No change in software problem.
Dose estop have to be wired to acorn to make light on G540 to change to green?
No change in software problem.
- Attachments
-
-
- report_f045da76bcca-0102191506_2019-04-07_11-53-38.zip
- (200.19 KiB) Downloaded 99 times
-
-
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
swissi
- Posts: 603
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Software problem
Kutton,
why are you using CNC12 version 4.12 and not the new version 4.14 if you start with a new system?
Your EstopOk is configured as NC (normally closed). So if you don't have an Estop wired the system remains in Estop status. You have to set it to NO if you don't have an Estop wired, otherwise nothing will work.
Also your ProbeDetect signal is configured as NO (normally open) which doesn't make any sense. Remove all probing stuff on your inputs until you have your motors running properly.
-swissi
why are you using CNC12 version 4.12 and not the new version 4.14 if you start with a new system?
Your EstopOk is configured as NC (normally closed). So if you don't have an Estop wired the system remains in Estop status. You have to set it to NO if you don't have an Estop wired, otherwise nothing will work.
Also your ProbeDetect signal is configured as NO (normally open) which doesn't make any sense. Remove all probing stuff on your inputs until you have your motors running properly.
-swissi
If you are using any Probing Device, a Rack ATC or want a more efficient Work Flow, check out CHIPS
Contact me at swissi2000@gmail.com
Contact me at swissi2000@gmail.com
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
Kutton
- Posts: 86
- Joined: Tue Jan 01, 2019 2:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Software problem
Download new version however wizard did not load.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)