Complete newbie here. I was bench testing my Centroid Acorn/Dyn2 controller box for a soon to be purchased CNC router. Software pairing on the Y axis was successful and the two servos jogged in unison, with the slaved servo moving equal and opposite the Y servo. I tried to use a G code instruction (g0y1) in CNC12, as seen in one of Marty's videos, but only the Y servo moved (the slave didn't) and the pairing was no longer in effect. I had to exit CNC12, use the Wizard to re-pair the axes, and then restart CNC12. This was a consistent result in more than 5 attempts.
My expectation was that the result of the g0y1 command was that both servos would move, but in opposite directions.
Do I misunderstand what should have happened?
Software Axis Pairing and G Code
Moderator: cnckeith
-
- Posts: 62
- Joined: Mon Apr 01, 2019 6:28 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Software Axis Pairing and G Code
- Attachments
-
- report_7804732BCC31-0227191699_2019-04-01_15-03-25.zip
- (198.25 KiB) Downloaded 88 times
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7911
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Software Axis Pairing and G Code
do you have Mill Pro installed?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 62
- Joined: Mon Apr 01, 2019 6:28 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Software Axis Pairing and G Code
No. I'm waiting to purchase when it's Router Pro.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 2296
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Software Axis Pairing and G Code
Don't wait. You need it to pair axes. (or add the pendant) It will be a free upgrade to those with Mill Pro.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 9917
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Software Axis Pairing and G Code
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
(Note: Liking will "up vote" a post in the search results helping others find good information faster)