Parameters

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
phill05
Posts: 23
Joined: Mon Jul 23, 2018 5:06 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D2694E473C-0110180513
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Derbyshire UK

Parameters

Post by phill05 »

In the manual section 14.3.3. Parameter 1- Y jog key orientation give you the option to flip direction of Y jog key, my question is there a parameter to flip X jog key.
I would find this very helpful to be able to do before I order a MPG.

Any help please.

Phill

Top
cnckeith
Site Admin
Posts: 8905
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Parameters

Post by cnckeith »

Phil, hello!
can you enlighten us on why you want to flip the VCP jog keys?

viewtopic.php?f=60&t=1043
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
phill05
Posts: 23
Joined: Mon Jul 23, 2018 5:06 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D2694E473C-0110180513
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Derbyshire UK

Re: Parameters

Post by phill05 »

Hello Keith,
I have the Acorn working great now my only niggle is I would like to flip the X+jog key from the right side to the left.
X- to X+.PNG
Phill

Top
Post Reply

Return to “Centroid Acorn CNC Controller”