Got the DMM drives back
Moderator: cnckeith
-
- Posts: 153
- Joined: Mon Nov 06, 2017 10:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0216041209
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Got the DMM drives back
Here is how they want them wired.
- Attachments
-
- DYN4 AC Servo Drive to Centroid Acorn - 5040426.pdf
- (1.1 MiB) Downloaded 168 times
Barnesville, PA.
I always thought it would take longer to grow old.
I always thought it would take longer to grow old.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Got the DMM drives back
So you got their DB25 cables this time correct?
If so, then yes wire them like they show.
Wire one on the bench, test it for motion
Report back after you have it moving.
There is a parameter you have to change in order for Acorn to detect DYN4's pulsing alarm output. Change 991 from 1000 to 1.
The next revision of software will do this automatically when DYN4 is selected.
Marty
If so, then yes wire them like they show.
Wire one on the bench, test it for motion
Report back after you have it moving.
There is a parameter you have to change in order for Acorn to detect DYN4's pulsing alarm output. Change 991 from 1000 to 1.
The next revision of software will do this automatically when DYN4 is selected.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 153
- Joined: Mon Nov 06, 2017 10:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0216041209
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Got the DMM drives back
Yes Marty I did get there Cables, waiting on three line reactors will be here Thursday. The Acorn expansion board will be here this morning.
Barnesville, PA.
I always thought it would take longer to grow old.
I always thought it would take longer to grow old.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Got the DMM drives back
You mean Acorn relay board?
Sounds good take it one step at a time...
Sounds good take it one step at a time...
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 360
- Joined: Thu Nov 23, 2017 1:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Got the DMM drives back
Did you get this up and running yet?
-
- Posts: 153
- Joined: Mon Nov 06, 2017 10:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0216041209
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Got the DMM drives back
No there here sitting in the boxes they came in, Playing with my 7.5" trains.
Barnesville, PA.
I always thought it would take longer to grow old.
I always thought it would take longer to grow old.