aceeleration in .nc code
Moderator: cnckeith
-
- Posts: 32
- Joined: Sun May 06, 2018 8:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: c8fd19c4ab47-0214180670
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: aceeleration in .nc code
report file
- Attachments
-
- report_C8FD19C4AB47-0214180670_2018-06-27_19-40-00.zip
- (1.02 MiB) Downloaded 86 times
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7911
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: aceeleration in .nc code
please upgrade to v4.12
http://www.centroidcnc.com/centroid_diy ... loads.html
follow the upgrade video instructions Exactly.
https://youtu.be/ZYmtJBEIMuQ
http://www.centroidcnc.com/centroid_diy ... loads.html
follow the upgrade video instructions Exactly.
https://youtu.be/ZYmtJBEIMuQ
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 32
- Joined: Sun May 06, 2018 8:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: c8fd19c4ab47-0214180670
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: aceeleration in .nc code
dear friend, it worked only axis X, I could enter the value of 126.5 but only on the X axis, I need on the Y axis also be able to enter a value equal to or greater than 126.5, so I need it on the X and Y axes
in the X axis can even put a value higher than 140, so the modification worked, a penalty that only in the X
in the X axis can even put a value higher than 140, so the modification worked, a penalty that only in the X
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 32
- Joined: Sun May 06, 2018 8:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: c8fd19c4ab47-0214180670
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: aceeleration in .nc code
Report file
- Attachments
-
- report_C8FD19C4AB47-0214180670_2018-06-28_18-08-53.zip
- (177.43 KiB) Downloaded 113 times
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7911
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: aceeleration in .nc code
cnc12 is compatible with Windows 10 only.
the report.zip file shows that you are running Windows 7
the report.zip file shows that you are running Windows 7
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 32
- Joined: Sun May 06, 2018 8:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: c8fd19c4ab47-0214180670
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: aceeleration in .nc code
friend, I take the time to program it in windows 10 and it does not allow me in the Y axis to put a value higher than 39.4
please I ask that the same permission I use on the X axis, do it on the Y axis,
and under windows7 it works perfectly, I do not have any problem, the restriction is of the cnc program in overall turn ratio
please ask, I have invested a lot of money and time, since the beginning of this post I commented that my problem was not being able to enter a higher value in "overal turn radio"
please I ask you to pass me a corrected version
I wait for your news
if you try it yourself you will realize that you can not enter a value greater than 39 on the Y, Z axes
please I ask that the same permission I use on the X axis, do it on the Y axis,
and under windows7 it works perfectly, I do not have any problem, the restriction is of the cnc program in overall turn ratio
please ask, I have invested a lot of money and time, since the beginning of this post I commented that my problem was not being able to enter a higher value in "overal turn radio"
please I ask you to pass me a corrected version
I wait for your news
if you try it yourself you will realize that you can not enter a value greater than 39 on the Y, Z axes
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7911
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: aceeleration in .nc code
i have tried my self. it works fine.
can you install teamviewer 12 and get an internet connection to the cncpc?
can you install teamviewer 12 and get an internet connection to the cncpc?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 32
- Joined: Sun May 06, 2018 8:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: c8fd19c4ab47-0214180670
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: aceeleration in .nc code
could you modify the value on the X and Y axes?
the machine is in the workshop where I do not have internet, but I could try
are you online now?
I have the teamviewe
the machine is in the workshop where I do not have internet, but I could try
are you online now?
I have the teamviewe
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 32
- Joined: Sun May 06, 2018 8:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: c8fd19c4ab47-0214180670
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: aceeleration in .nc code
my teamviever id is 1 078 549 991,
the pasword 6321
the pasword 6321
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7911
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: aceeleration in .nc code
when i try to connect...says no connection..
viewtopic.php?f=61&t=1448
please set up a permanent password and private message me.
viewtopic.php?f=61&t=1448
please set up a permanent password and private message me.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)