Acorn Wizard <CTRL P to Print to PDF>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Kevin0135
Posts: 1
Joined: Fri Nov 22, 2024 1:01 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Acorn Wizard <CTRL P to Print to PDF>

Post by Kevin0135 »

Hi, I'm new to this so please bear with me.

I find that I have to upgrade the software that I am using and I need to be able to print all the current settings. Is there a way to do that without making countless screenshots?

Thanks,
Kevin

Top
Ken Rychlik
Posts: 554
Joined: Wed Jan 23, 2019 4:19 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 80F5B5B92C3A-0213236854
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acorn Wizard

Post by Ken Rychlik »

It depends on how old of a version you have. Try this "below" and if it doesn't work, you will have to do each one with a screenshot.

From the Wizard Press CTRL and P at the same time to Print all Wizard screens to a PDF
Ken

Top
Post Reply

Return to “Centroid Acorn CNC Controller”