ESTUN Pronet e-04a Servo Drive

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Ryan Patterson
Posts: 63
Joined: Wed Oct 16, 2024 3:30 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

ESTUN Pronet e-04a Servo Drive

Post by Ryan Patterson »

Has anyone used ESTUN Pronet e-04a servo drives. If so did you have any issues?

Top
cnckeith
Site Admin
Posts: 8932
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: ESTUN Pronet e-04a Servo Drive

Post by cnckeith »

yep in this video you'll see the last machine i did with them.


they work well and have been running non stop

negative is there is no auto tuning via Estun software so you have to 'hand tune' them. took me 1/2 a day just to do that.
i can send you my numbers which would work as a base line for a similar machine
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”