9045 Z axis fault

[sshield]

My centroid control PC decided to do a windows update this afternoon. After that, every time I try and start a program in CNC12 Mill, I get a 9045 Z Axis Drive Fault error. The system no longer moves. Was working all week without issue. The timing coinciding with a windows update is too suspicious. Any ideas what this error code even means? Drive displays are not showing any faults.

I have tried everything I could from Tech Bulletins 270 and 309 without success.

[cnckeith]

hello.
please follow the tech support request posting guidelines and provide detailecd information about your machine/project
starting by posting a fresh report.zip

[centroid467]

My centroid control PC decided to do a windows update this afternoon. After that, every time I try and start a program in CNC12 Mill, I get a 9045 Z Axis Drive Fault error. The system no longer moves. Was working all week without issue. The timing coinciding with a windows update is too suspicious. Any ideas what this error code even means? Drive displays are not showing any faults.

I have tried everything I could from Tech Bulletins 270 and 309 without success.

Please follow these guidelines: https://centroidcncforum.com/viewtopic.php?f=60&t=1043

We need to know what you have to be able to help you troubleshoot.

[ShawnM]

This is one of the MANY reasons why your CNC PC should NOT be connected to the internet. A fresh report is needed to help you.

[suntravel]

You can use a restore point before the update if you think the update is responsible for the problem.

Uwe