All flash storage has a finite lifespan although the eMMC used on the BBG has wear leveling and all that jazz so... You are probably looking at 5 or 6 figures worth of write cycles
Centroid CNC12 v5.1 RC3 installer, Mill, Lathe, Router, Plasma, Acorn, AcornSix, Hickory, Oak, Allin1DC, MPU11
Moderator: cnckeith
-
centroid467
- Posts: 268
- Joined: Thu Apr 14, 2022 2:46 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
-
cnckeith
- Posts: 7348
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.1 RC3 installer, Mill, Lathe, Router, Plasma, Acorn, AcornSix, Hickory, Oak, Allin1DC, MPU11
rc#4 is here.
https://centroidcncforum.com/viewtopic.php?f=67&t=9997
https://centroidcncforum.com/viewtopic.php?f=67&t=9997
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html