Centroid CNC12 v5.07 rev8 BETA is now available.
Moderator: cnckeith
-
- Posts: 2091
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
Acorn Mill 5.07 R6 done, nothing to complain about so far.
I am really happy with the new Rapid Override
Uwe
I am really happy with the new Rapid Override
Uwe
-
- Posts: 7427
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
right on, thanks for the feedback.
we figured out why you had to modify the feedrate_override.svg to solve an overlap issue.
looks like you used the old feedrate_override.svg with the new VCP?
The new v5.07 feedrate_override.svg included with the installer has a 'invisible area' in it that has the effect of adding a buffer/padding to the image which makes it easier to read and prevents overlap.
we figured out why you had to modify the feedrate_override.svg to solve an overlap issue.
looks like you used the old feedrate_override.svg with the new VCP?
The new v5.07 feedrate_override.svg included with the installer has a 'invisible area' in it that has the effect of adding a buffer/padding to the image which makes it easier to read and prevents overlap.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2091
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
No, I have had the overlap on both right after installing with no modification, so I changed the feedrate_override.svg in the image folder.
Rapid Over button is now kind of obsolete with the new rapid skin....
Would be cool if the VCP changes to Rapid if =0 with Feed selected on the WMPG and back to Feed if released
Uwe
Rapid Over button is now kind of obsolete with the new rapid skin....
Would be cool if the VCP changes to Rapid if =0 with Feed selected on the WMPG and back to Feed if released
Uwe
-
- Posts: 7427
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
suntravel wrote: ↑Fri Sep 29, 2023 3:32 pm No, I have had the overlap on both right after installing with no modification, so I changed the feedrate_override.svg in the image folder. < hmmm, got to look at it again, i couldn't get that to happen what res are you running at? report shows 1920x1080 is that true?> [/color]
Rapid Over button is now kind of obsolete with the new rapid skin....< yep inadvertently left there, rapid over button should not be on the default 'rapid' skin. and for anyone reading that button will still work so functionality is still there etc if you want the VCP to be like the old way of doing things. so to be clear we are not eliminating any existing functionality >
Would be cool if the VCP changes to Rapid if =0 with Feed selected on the WMPG and back to Feed if released < yeah we can do that>
Uwe
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2091
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
Jep 1920x1080
I defined a new output in the PLC, it is working ( I can see it in the PLC detective ), I can also switch an image in the VCP with it, but making the button Rapid-Feed work like pressed on the VCP fail
Uwe
I defined a new output in the PLC, it is working ( I can see it in the PLC detective ), I can also switch an image in the VCP with it, but making the button Rapid-Feed work like pressed on the VCP fail
Code: Select all
<vcp_button>
<plc_output>
<number>1146</number>
<switch>
<switch_on>
<remove>feed_group</remove>
<remove>feed_button_group</remove>
<add>rapid_group</add>
<image_on>rapid_feed_lit.svg</image_on>
</switch_on>
<switch_off>
<remove>rapid_group</remove>
<add>feed_group</add>
<add>feed_button_group</add>
<image_off>rapid_feed.svg</image_off>
</switch_off>
<remove>linked_group</remove>
<add>unlinked_group</add>
</switch>
</plc_output>
</vcp_button>
-
- Posts: 2091
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
New issue:
I have only Probe Detect and Probe Tripped as inputs, using them for Tool Touch Off too.
With 5.07 on Acorn Mill this will not work, stops with message TT0 Input not set in PLC.
I have had to set the Input to ToolTouchOffTriggered.....
The Probe will work this way, pls. change this back so TTO and Probe could use the same input.
Uwe
I have only Probe Detect and Probe Tripped as inputs, using them for Tool Touch Off too.
With 5.07 on Acorn Mill this will not work, stops with message TT0 Input not set in PLC.
I have had to set the Input to ToolTouchOffTriggered.....
The Probe will work this way, pls. change this back so TTO and Probe could use the same input.
Uwe
- Attachments
-
- report_6433DB0446C1-0811215047_2023-10-01_06-51-53.zip
- (1.34 MiB) Downloaded 55 times
-
- Posts: 2091
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
small issues or not, no problem to produce parts with 5.07, as usual for Centroids beta versions, I am sure I have made more parts with beta versions than with regular ones
Uwe
Uwe
-
- Posts: 7427
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
right on! nice knife! the wood looks a lot like the Juniper growing in my back yard.
great video, thanks for posting the video and your efforts on testing beta software.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7427
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
fyi... the CNC12 installation instructions have been updated to include all Centroid Hardware that is capable of running CNC12 and a introduction/discussion section has been added as well.
(Acorn users will be glad to have the Wizard if they read the Oak/Allin1DC/MPU11 sections)
https://www.centroidcnc.com/centroid_di ... ctions.pdf
(Acorn users will be glad to have the Wizard if they read the Oak/Allin1DC/MPU11 sections)
https://www.centroidcnc.com/centroid_di ... ctions.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2091
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.07 rev6 BETA is now available.
Same on the lathe, I you use Probe as inputs, the input is also set for TTO in the wizard, with TTO only for the TTO.suntravel wrote: ↑Sat Sep 30, 2023 9:34 am New issue:
I have only Probe Detect and Probe Tripped as inputs, using them for Tool Touch Off too.
With 5.07 on Acorn Mill this will not work, stops with message TT0 Input not set in PLC.
I have had to set the Input to ToolTouchOffTriggered.....
The Probe will work this way, pls. change this back so TTO and Probe could use the same input.
Uwe
But setting up tools with Probe input is not possible.
Not an issue on my lathe, since I have only TTO an free inputs, but on my mill no free inputs and sharing Probe with TTO worked perfectly up to 5.04
Why was this changed, and could we go back pls ?
Schematic S15122 shows also it should be possible to share Probe input with TTO.
Uwe