Centroid CNC12 v5.07 rev8 BETA is now available.
Moderator: cnckeith
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: Centroid CNC12 v5.07 rev8 BETA is now available.
You might be right there Shawn, I think it did just delete my Probe App mfunc6 each time. Overwrite was the wrong descriptor.
Scott
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.07 rev8 BETA is now available.
any news?
i'm about to let rev10 out of the pen. testing it now.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 1979
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.07 rev8 BETA is now available.
Another bug in 5.07R8 :
G37 OFF turns PWM on, G37 ON turns it off despite off the message PWM VM ON on the display
That was bullshit, I forgot that with G37 ON I had to move an axis to get the Laser on
Uwe
G37 OFF turns PWM on, G37 ON turns it off despite off the message PWM VM ON on the display
That was bullshit, I forgot that with G37 ON I had to move an axis to get the Laser on
Uwe