Centroid Community CNC Support Forum

Hi i have an oak with CWP-4 wireless pendant and it doesn't connect to oak. I use it acorn and works just fine. It sees receiver reception. so here is a report.

when i select an axis and turn mpg, windows makes a sound but no pop up window or errors. and nothing under my properties has any driver issues.

The CWP-4 connects to the computer, through USB and Windows; not directly to the Oak or Acorn.

Have you tried using the computer from your Acorn control to run your Oak control; or vice versa? You can do that, simply by renaming your c:\cncm or c:\cnct directory, then installing the appropriate CNC12 version and restoring a Report.

cncsnw wrote: ↑Mon Apr 17, 2023 3:12 am The CWP-4 connects to the computer, through USB and Windows; not directly to the Oak or Acorn.

Have you tried using the computer from your Acorn control to run your Oak control; or vice versa? You can do that, simply by renaming your c:\cncm or c:\cnct directory, then installing the appropriate CNC12 version and restoring a Report.

yes im aware it connects to computer usb. i can see in the Hid under property management that its connecting and disconnecting for pc. I use this wireless on a diff lathe and a router and both work fine. Tired different usb ports and even bought an pci express to usb3.1 card to see if it was something from main board.

cant connect use computer from acorn on oak as the plc and stuff is way different.

hi i moved this thread into the beta test forum.

cnckeith wrote: ↑Thu Apr 20, 2023 2:12 pm hi i moved this thread into the beta test forum.

It was doing the same thing before i did the beta software upgrade.

occustoms wrote: ↑Sat Apr 22, 2023 3:15 pm

cnckeith wrote: ↑Thu Apr 20, 2023 2:12 pm hi i moved this thread into the beta test forum.

It was doing the same thing before i did the beta software upgrade.

post photo of the wireless LCD screen when CNC12 is running