new one hit buttons question

Moderator: cnckeith

suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: new one hit buttons question

Post by suntravel »

Good catch Tom,

did not expect someone would try this :D

Uwe
midy
Posts: 203
Joined: Wed Oct 11, 2017 12:20 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: new one hit buttons question

Post by midy »

Well, I just about give up, reinstalled rev 6 and same things happening. I thought the date was taken from the pc? Look at the video, i'm not opening intercon?
Attachments
bizarre.mp4
(5.59 MiB) Downloaded 6 times
wrong date.jpg
report_74E1829FB66D-0312191755_2023-03-16_14-39-03.zip
(959.97 KiB) Downloaded 6 times
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: new one hit buttons question

Post by suntravel »

Did you delete the C:\icn_lath folder before the installation of R6?

Uwe
midy
Posts: 203
Joined: Wed Oct 11, 2017 12:20 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: new one hit buttons question

Post by midy »

No, sounds like I should have done? How are you supposed to know theses things? What now, can I delete said file and reinstall?
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: new one hit buttons question

Post by suntravel »

Yes, because now you have kept the messed up one shot files...

...2004 is the date the file was created, not the actual date.

Uwe
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: new one hit buttons question

Post by suntravel »

There is really a bug in R6, after using one shots and going to CAM they are loaded in Intercon.

No good, easy to overwrite them this way...

Uwe
midy
Posts: 203
Joined: Wed Oct 11, 2017 12:20 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: new one hit buttons question

Post by midy »

This is what I've been trying to say but I just got told I was trying to open them in intercon (which I knew I wasn't)

There are other bugs too, after running the oneshot , they too are changing the dro readout for some reason.
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: new one hit buttons question

Post by suntravel »

midy wrote: Thu Mar 16, 2023 2:58 pm This is what I've been trying to say but I just got told I was trying to open them in intercon (which I knew I wasn't)

There are other bugs too, after running the oneshot , they too are changing the dro readout for some reason.
This is no bug only the tool offset is unloaded.

Try in MDI T0101 and after this T0100 if you have offsets in 01 the DRO will change.

Uwe
cncsnw
Posts: 3764
Joined: Wed Mar 24, 2010 5:48 pm

Re: new one hit buttons question

Post by cncsnw »

Not a bug, but certainly an undesirable feature.

Centroid should change Intercon so that when it posts from a one-shot program, it refrains from canceling tool offsets.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: new one hit buttons question

Post by cnckeith »

midy wrote: Thu Mar 16, 2023 10:49 am Well, I just about give up, reinstalled rev 6 and same things happening. I thought the date was taken from the pc? Look at the video, i'm not opening intercon?
wait for rev7 in this regard. hope to have rev7 soon, we are testing it now.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply