new one hit buttons question
Moderator: cnckeith
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: new one hit buttons question
Good catch Tom,
did not expect someone would try this
Uwe
did not expect someone would try this
Uwe
-
- Posts: 203
- Joined: Wed Oct 11, 2017 12:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: new one hit buttons question
Well, I just about give up, reinstalled rev 6 and same things happening. I thought the date was taken from the pc? Look at the video, i'm not opening intercon?
- Attachments
-
- bizarre.mp4
- (5.59 MiB) Downloaded 8 times
-
- report_74E1829FB66D-0312191755_2023-03-16_14-39-03.zip
- (959.97 KiB) Downloaded 8 times
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: new one hit buttons question
Did you delete the C:\icn_lath folder before the installation of R6?
Uwe
Uwe
-
- Posts: 203
- Joined: Wed Oct 11, 2017 12:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: new one hit buttons question
No, sounds like I should have done? How are you supposed to know theses things? What now, can I delete said file and reinstall?
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: new one hit buttons question
Yes, because now you have kept the messed up one shot files...
...2004 is the date the file was created, not the actual date.
Uwe
...2004 is the date the file was created, not the actual date.
Uwe
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: new one hit buttons question
There is really a bug in R6, after using one shots and going to CAM they are loaded in Intercon.
No good, easy to overwrite them this way...
Uwe
No good, easy to overwrite them this way...
Uwe
-
- Posts: 203
- Joined: Wed Oct 11, 2017 12:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: new one hit buttons question
This is what I've been trying to say but I just got told I was trying to open them in intercon (which I knew I wasn't)
There are other bugs too, after running the oneshot , they too are changing the dro readout for some reason.
There are other bugs too, after running the oneshot , they too are changing the dro readout for some reason.
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: new one hit buttons question
This is no bug only the tool offset is unloaded.
Try in MDI T0101 and after this T0100 if you have offsets in 01 the DRO will change.
Uwe
Re: new one hit buttons question
Not a bug, but certainly an undesirable feature.
Centroid should change Intercon so that when it posts from a one-shot program, it refrains from canceling tool offsets.
Centroid should change Intercon so that when it posts from a one-shot program, it refrains from canceling tool offsets.
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: new one hit buttons question
wait for rev7 in this regard. hope to have rev7 soon, we are testing it now.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html