Hello,
The hand wheel on the MPG4 does not work when 10x & 100x are selected on all axis, works fine with 1x. This is with AcornSix/ Rev6.
All the other functions on the MPG work.
Reinstalled Rev4 to see if the MPG was faulty and it worked fine.
Thanks
Bill
MPG hand wheel
Moderator: cnckeith
-
- Posts: 3095
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: MPG hand wheel
Do you have a probe installed? It sounds like CNC12 thinks your probe is tripped preventing X10 and X100 movement.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 86
- Joined: Sat Feb 27, 2021 10:55 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E415F6F2C7C9-0211214367
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Quincy, MA
Re: MPG hand wheel
Yes I have a probe & TT installed. The probe was not plugged in, only the TT. This issue started with the new rev6 release on the AcornSix, did not happen in rev4.
Thanks
Bill
Thanks
Bill
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: MPG hand wheel
Bill,
on my lathe it woks right 453 only if tripped when jogging.
Pls check if TT and Probe Tripped inputs are not on.
Forced Input, or state when tripped in the Wizard set wrong
Alt-I to see the Inputs on screen.
Related reading:
https://www.centroidcnc.com/centroid_di ... _setup.pdf
Uwe
on my lathe it woks right 453 only if tripped when jogging.
Pls check if TT and Probe Tripped inputs are not on.
Forced Input, or state when tripped in the Wizard set wrong
Alt-I to see the Inputs on screen.
Related reading:
https://www.centroidcnc.com/centroid_di ... _setup.pdf
Uwe
-
- Posts: 86
- Joined: Sat Feb 27, 2021 10:55 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E415F6F2C7C9-0211214367
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Quincy, MA
Re: MPG hand wheel
Here is a link for the screenshots.
https://photos.app.goo.gl/QyaW2F2DR8YZLWCC9
When both the TP & TT are tripped the led in the upper left corner of the turtle icon turns on
The probe & TT are wired correctly and working as they should using the PLC diagnostics.
Removed both from the wizard and the MPG works as it should.
The 453 error code has been displayed since I first installed AcornSix and has been, through every rev, but doesn't appear to have any negative impact on the operation of the machine.
Thanks
Bill
https://photos.app.goo.gl/QyaW2F2DR8YZLWCC9
When both the TP & TT are tripped the led in the upper left corner of the turtle icon turns on
The probe & TT are wired correctly and working as they should using the PLC diagnostics.
Removed both from the wizard and the MPG works as it should.
The 453 error code has been displayed since I first installed AcornSix and has been, through every rev, but doesn't appear to have any negative impact on the operation of the machine.
Thanks
Bill
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: MPG hand wheel
thanks,bleiler60 wrote: ↑Sat Mar 04, 2023 11:20 am Here is a link for the screenshots.
https://photos.app.goo.gl/QyaW2F2DR8YZLWCC9
When both the TP & TT are tripped the led in the upper left corner of the turtle icon turns on
The probe & TT are wired correctly and working as they should using the PLC diagnostics.
Removed both from the wizard and the MPG works as it should.
The 453 error code has been displayed since I first installed AcornSix and has been, through every rev, but doesn't appear to have any negative impact on the operation of the machine.
Thanks
Bill
the turtle icon turns on to let you know that since the probe is tripped the MPG only works in x1 (slow mode) so you don't continue to run the probe into what it is touching.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html