ATC Carousel
Moderator: cnckeith
-
- Posts: 31
- Joined: Fri Jun 17, 2022 3:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: cnc12 Mill Pro E0623483321F-0412225912,CNC Router Pro E0623479658B-1022203857
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mass
- Contact:
ATC Carousel
Help.
I am replacing all of an AXYZ 4008 electronics with an Acorn By Centroid.
I have all of it running including Automatic squaring.
Running CNC12 V4.99 Rev4 Beta with the hope of better ATC settings.
I am now attempting to set up the 8 tool carousel and :
1) I am running the Stepper motor to turn the Carousel Forward, Stop, Reverse, stop with an Arduino and that is working.
2) I do not have ATC_CarouselForward output (41) and ATC_CarouselReverse output (42) (where do I find them?) Or do I have to make Macros for them
3) Is there a step by stem procedure for this specific Carousel? If not can someone help me with some kind of a roadmap?
4) How do I set tool one to home.
I am replacing all of an AXYZ 4008 electronics with an Acorn By Centroid.
I have all of it running including Automatic squaring.
Running CNC12 V4.99 Rev4 Beta with the hope of better ATC settings.
I am now attempting to set up the 8 tool carousel and :
1) I am running the Stepper motor to turn the Carousel Forward, Stop, Reverse, stop with an Arduino and that is working.
2) I do not have ATC_CarouselForward output (41) and ATC_CarouselReverse output (42) (where do I find them?) Or do I have to make Macros for them
3) Is there a step by stem procedure for this specific Carousel? If not can someone help me with some kind of a roadmap?
4) How do I set tool one to home.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 31
- Joined: Fri Jun 17, 2022 3:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: cnc12 Mill Pro E0623483321F-0412225912,CNC Router Pro E0623479658B-1022203857
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mass
- Contact:
Re: ATC Carousel
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7843
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: ATC Carousel
Hi, i see you are running the beta software, so moving this thread to the beta forum.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 31
- Joined: Fri Jun 17, 2022 3:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: cnc12 Mill Pro E0623483321F-0412225912,CNC Router Pro E0623479658B-1022203857
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mass
- Contact:
Re: ATC Carousel
Here is a new Link, Hope it works
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7843
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: ATC Carousel
ok! that helps alot. now we can see what you got.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7843
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: ATC Carousel
two ways to go.
1.) install the release version of CNC12 Mill v4.82 and follow the ATC carousel instructions here. (and install your Pro or Ultimate License, report shows system is still on "Free")
https://www.centroidcnc.com/centroid_di ... ograms.zip
2.) or continue to work with beta software and use the new built-in ATC menu in the Wizard to setup the Carousel.
i should have an updated v4.99 rev5 public beta very soon.
either way here are the hookup schematics.
single phase
https://www.centroidcnc.com/dealersuppo ... 119.r1.pdf
three phase.
https://www.centroidcnc.com/dealersuppo ... 120.r1.pdf
1.) install the release version of CNC12 Mill v4.82 and follow the ATC carousel instructions here. (and install your Pro or Ultimate License, report shows system is still on "Free")
https://www.centroidcnc.com/centroid_di ... ograms.zip
2.) or continue to work with beta software and use the new built-in ATC menu in the Wizard to setup the Carousel.
i should have an updated v4.99 rev5 public beta very soon.
either way here are the hookup schematics.
single phase
https://www.centroidcnc.com/dealersuppo ... 119.r1.pdf
three phase.
https://www.centroidcnc.com/dealersuppo ... 120.r1.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 31
- Joined: Fri Jun 17, 2022 3:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: cnc12 Mill Pro E0623483321F-0412225912,CNC Router Pro E0623479658B-1022203857
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mass
- Contact:
Re: ATC Carousel
cnckeith ;
I have uploaded 2 more photos that show the pro license installed, I don't know why the report shows otherwise.
I have gone through many pages of instructions (including the your link) and it's just getting worse.
1) I should first get the carousel to home, to tool (1), Totally disregard the ATC_CarouselForward and ATC_CarouselReverse.
now that you have seen the photos what is a good approach for that?
Am I going in the right direction?
I have uploaded 2 more photos that show the pro license installed, I don't know why the report shows otherwise.
I have gone through many pages of instructions (including the your link) and it's just getting worse.
1) I should first get the carousel to home, to tool (1), Totally disregard the ATC_CarouselForward and ATC_CarouselReverse.
now that you have seen the photos what is a good approach for that?
Am I going in the right direction?
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 31
- Joined: Fri Jun 17, 2022 3:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: cnc12 Mill Pro E0623483321F-0412225912,CNC Router Pro E0623479658B-1022203857
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Mass
- Contact:
Re: ATC Carousel
cncKeith;
Could the license glitch be eliminating the ATC_CarouselForward and ATC_CarouselReverse from my OUTPUT list??
Could the license glitch be eliminating the ATC_CarouselForward and ATC_CarouselReverse from my OUTPUT list??
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7843
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: ATC Carousel
please post a fresh report.zip, maybe the report you posted was before you installed the license.Angelo DiCenso wrote: ↑Tue Feb 21, 2023 7:12 pm cnckeith ;
I have uploaded 2 more photos that show the pro license installed, I don't know why the report shows otherwise.
I have gone through many pages of instructions (including the your link) and it's just getting worse.
1) I should first get the carousel to home, to tool (1), Totally disregard the ATC_CarouselForward and ATC_CarouselReverse.
now that you have seen the photos what is a good approach for that?
Am I going in the right direction?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7843
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: ATC Carousel
I'll have a v4.99 rev5 soon. with improvements to this area. creating an "ATC" input / output selection that shows only i/o related to ATC'sAngelo DiCenso wrote: ↑Tue Feb 21, 2023 9:15 pm cncKeith;
Could the license glitch be eliminating the ATC_CarouselForward and ATC_CarouselReverse from my OUTPUT list??
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)