Reset Home Error & Error 453

Moderator: cnckeith

Post Reply
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Reset Home Error & Error 453

Post by bleiler60 »

Hello,
after running the Reset Home routine, the axis pairing is removed in the wizard as shown in the screen shots. The machine was homed/squared before using home reset.

Also I'm getting a 453 error code when jogging using the jog buttons on the VCP. I'm using the KP-3 probe.

Bill B.
Attachments
report_0008DC111213-1005220063_2023-02-11_11-56-56.zip
(780.51 KiB) Downloaded 3 times
Axes Pairing.PNG
Reset Home.PNG
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Reset Home Error & Error 453

Post by cnckeith »

thanks

AcornSix axis pairing wmpg bug has been fixed.
work around is to jog the axis with vcp button first after homing.

looking into the 453 stuff now

image shows that there is no paired axis. be sure to install the pro license file and choose axes to pair before selecting and running a auto square home program.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Re: Reset Home Error & Error 453

Post by bleiler60 »

Hi Keith,

Installed AcornSix Rev8 and I'm still getting Error 453 and using reset home unpairs the Y axis motors.

Thanks
Bill
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Reset Home Error & Error 453

Post by cnckeith »

bill, send me and email with phone number and we will arrange a TV session to see what is going on. -k
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Re: Reset Home Error & Error 453

Post by bleiler60 »

Hi Keith,
Did a TeamViewer with Joey & Chris and they have sorted everything out with a new rev.
Thank you all ;)
Well done!!!
Bill
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Reset Home Error & Error 453

Post by cnckeith »

thanks for reporting back, and thanks for you help, we hope to have a v5.0 beta out later today.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply