C axis parameters (CNCT)

Moderator: cnckeith

cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: C axis parameters (CNCT)

Post by cnckeith »

I moved this thread to the beta testing forum.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: C axis parameters (CNCT)

Post by suntravel »

Scary wrote: Mon Feb 20, 2023 4:41 pm Thanks for that, I might hold off on upgrading for the minute and watch this space. I understand that they have alot on their plate after the plasma release. It suits me better financialy to wait too.

Thanks again and I look forward to your next video showing off the acorn6
Benchtest ok with 499R6, my manual is here:

https://centroidcncforum.com/viewtopic.php?f=67&t=8445

Have fun

Uwe
Attachments
20230303_181011.jpg
20230303_180936.jpg
Post Reply