Error Code 916 while auto squaring <beta software>

Moderator: cnckeith

suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Error Code 916 while auto squaring

Post by suntravel »

I don´t think the probe is defect, Inputs are switching as they should.

Probably something in the autosquare is not right.

Uwe
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Re: Error Code 916 while auto squaring

Post by bleiler60 »

I don't know if this maybe related. After doing the auto square/homing with the probe plugged in (machine homed & squared), I tried using the MDI to move an axis and got the same 916 error, the probe was disconnected.

I'm also having an issue with the wireless MPG after running the auto square/homing routine. Using the MPG to move the Y axis, only the master moves the slave stays put, only after moving the Y axis using the VCP jog button will the MPG work moving both master & slave.
cnckeith
Posts: 7165
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Error Code 916 while auto squaring

Post by cnckeith »

ive asked chris to jump in here and help you out with the AcornSix beta software.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Re: Error Code 916 while auto squaring

Post by bleiler60 »

Thank You
cnckeith
Posts: 7165
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Error Code 916 while auto squaring

Post by cnckeith »

in prep, post info on how you have things wired etc..
post a link to a online photo album full of photos of the machine and control cabinet etc.. a picture is worth a thousand words, this way we can more effectively help you.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Re: Error Code 916 while auto squaring

Post by bleiler60 »

Here are the pics.
I changed from the Mill to the Router software, no difference.

These are the issues I'm having.
1: can't run Auto Square/ Home without Probe connected/ homes when connected. Get Error code 916.
2: can't move axis using MDI without probe connected, get Error code 916.
3: TT-4 will not complete test procedure, page 11, step 10 in the TT-4 manual.
4: Wireless MPG will only move Master & Slave motors (Y axis) together after using the jog button on the VCP, works fine for X & Z Axis.

I wired the control panel using the wiring diagrams that are posted here. The z-axis brake, air solenoid's for the spindle & E-Stop contactor are wired too the 2nd output relay board and run off a separate power supply. AcornSix has it's own power supply.

https://photos.app.goo.gl/7c2X6rJdmTS6n15Q8
https://photos.app.goo.gl/5BV1w9PJEFNmsKK49
S15149.r2.pdf
(172.98 KiB) Downloaded 16 times
S15145.r2.pdf
(167.91 KiB) Downloaded 9 times
s15128.r1.pdf
(146.58 KiB) Downloaded 5 times
s15117.r1.pdf
(142.83 KiB) Downloaded 6 times
Attachments
report_0008DC111213-1005220063_2022-12-07_07-03-32.zip
(795.78 KiB) Downloaded 6 times
Allin1Chris
Posts: 132
Joined: Wed Jul 31, 2019 12:53 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Error Code 916 while auto squaring <beta software>

Post by Allin1Chris »

This appears to be a bug in the Beta software, been able to replicate it. It seems to effect any probe that is Open when tripped.

Currently working on a solution, may take some time.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)

Centroid PLC Tutorial Videos
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Re: Error Code 916 while auto squaring

Post by bleiler60 »

Thank you for looking into this!
Does this bug also affect the issue with the MPG?
As far as the issue with the TT-4. I noticed that it was configured as mechanical, not for the MPG-4. I'll fix that and rerun the test. Sorry about that :oops:
bleiler60
Posts: 86
Joined: Sat Feb 27, 2021 10:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F2C7C9-0211214367
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Quincy, MA

Re: Error Code 916 while auto squaring

Post by bleiler60 »

Reconfigured TT-4, will not pass test described in the manual.
cnckeith
Posts: 7165
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Error Code 916 while auto squaring <beta software>

Post by cnckeith »

hello.
we fixed the probe related issue that we could find in v4.99 rev3.
if you are still having issues with rev3, lets arrange a TeamViewer session so we can take a look at your setup.
PM me so setup time etc..
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply