CNC12 v5.1 RC#5 Mill, Lathe, Router, Plasma RC5 now available for download and testing.

[cnckeith]

Character display problem now. Same version 5.1RC5
IMG_8897.jpeg

we are having hard time reproducing this one.

[avp]

Ok, no problem, I believe it happened when I was using auto Z to plate. Gcode file that was loaded at the time did not refresh view wise.
Any timeframe on testing for the router specific rework?

Bill

report_E062346A1C67-0716214939_2024-04-16_15-48-18.zip

(935.56 KiB) Not downloaded yet

[cnckeith]

Ok, no problem, I believe it happened when I was using auto Z to plate. Gcode file that was loaded at the time did not refresh view wise.
Any timeframe on testing for the router specific rework?

Bill
report_E062346A1C67-0716214939_2024-04-16_15-48-18.zip

as soon as v5.1 is released i will have a v5.19 beta within a few days.

RC6 is here. see if you can get that graphics overlay to happen again.

https://centroid-support.filemail.com/d/hmudxsfolvbjbeq

[RogDC]

I attempted to update my CNC12 to v5.1 which I downloaded from the Centroidcnc.com website today.

I did a clean install of 5.1, and was having some configuration issues and tried to roll back to 5.04. I did something incorrectly renaming folders to cncm and ended up copying 4.65v8 Beta to the cncm folder, and now the Acorn is Stuck in v4.65r8 beta unable to install the 5.1 version and keep getting beta version expired when attempting to load a more recent version of SW.

I rolled back my PC clock to 4/27/2022 to get this to work, but am unable to install the latest version of CNC12.

Not sure how to overcome this issue.

BB has a hearbeat, cnc 5.1 goes thru the installation process fine, but returns the beta software has expired, then I need to put my computer clock back, then it opens 4.65 r8 bet.

Of course i have a large job to get out the door and was attempting to upgrade to see if I could resolve some movement issues I was experiencing in 5.04 which was telegraphing to the finish tool path.

Any help would be appreciated on how to load the latest version again.

[RogDC]

Update - I downloaded the CNC12 5.1 RC6 file and was able to get the 5.1 RC6 to install. Not certain what occurred with the file downloaded from Centroidcnc.com-->Support-->downloads.