CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, Drill

[cnckeith]

starting a fresh thread specifically for CNC12 Mill and Router Tool Library and the related setup menus for ATC, TT, Tool Height Offset Measurement method, Drill Bank, Laser and more.

[corbin]

Awesome! The "Measurement Option" is a nice feature.

[cnckeith]

adding G152 and G143 in place of G52.2.3.4. etc
added new Wizard tool measurement method decision screen

cnc12 tool library 2024_1920_rev4.pdf

(1.9 MiB) Downloaded 38 times

[suntravel]

Hi Keith,

good Idea with the new wizard page.

I would also mention my preferred method there with P43=1 because this way on a VMC type mill or router G54 Z 0 is the top surface from the machining table.

Uwe

[cnckeith]

Hi Keith,

good Idea with the new wizard page.

I would also mention my preferred method there with P43=1 because this way on a VMC type mill or router G54 Z 0 is the top surface from the machining table.

Uwe

yeah! thats on the next page, one step at a time

[cncsnw]

Tangentially related: will the new tool library -- whatever it ends up looking like -- be accessible and browsable from within an Intercon F4/Tool Change operation?

[cnckeith]

Tangentially related: will the new tool library -- whatever it ends up looking like -- be accessible and browsable from within an Intercon F4/Tool Change operation?

yes.

[RogDC]

Will the ATC initialization page text be updated based on the tool touch off decision/settings page?

Can the TT be configured to use a moveable touch plate in a fixed location, for example the Avid Plate placed in a fixed holder on the table @ g30 P3?