Centroid Operator Control Panel Interface Board: USB-BOB

Moderator: cnckeith

Post Reply
centroid467
Posts: 291
Joined: Thu Apr 14, 2022 2:46 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: Centroid Operator Control Panel Interface Board: USB-BOB

Post by centroid467 »

suntravel wrote: ↑Wed May 01, 2024 10:57 am Connected now.

What I found out ist that the 5m extension is only working with max. 0.5m primary USB cable.

Makes sense, because by standard USB2.0 is limited to 5m.

Will the first Opcon work after update also?

Uwe
We're not planning on breaking existing OPCON functionality. USBBOB uses an expanded OPCON data format and CNC12 can distinguish between them and prepare to parse the correct data format.
Top
suntravel
Posts: 2090
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Centroid Operator Control Panel Interface Board: USB-BOB

Post by suntravel »

Good news, since I am used to the Opcon on my lathe.

Uwe
Top
Post Reply

Return to “Public Beta CNC Software Testing, Discussion and Feedback”