I have not seen any mention of this in the release notes, and do not currently have a wireless MPG available for testing.
Has the issue that causes CNC12 to report "412 MPG1 encoder error" when it starts up with a properly configured, powered on, properly functioning wireless MPG been found and fixed yet?
412 MPG1 encoder error on startup
Moderator: cnckeith
-
cnckeith
- Posts: 5563
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: 412 MPG1 encoder error on startup
Hello.cncsnw wrote: ↑Thu Mar 16, 2023 9:55 pm I have not seen any mention of this in the release notes, and do not currently have a wireless MPG available for testing.
Has the issue that causes CNC12 to report "412 MPG1 encoder error" when it starts up with a properly configured, powered on, properly functioning wireless MPG been found and fixed yet?
first i have heard of this one.
what version and platform have you been getting this message on?
i'll send you a wireless MPG today.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Re: 412 MPG1 encoder error on startup
Keith,
See:
P218 = 15
P348 = 15
Complete report attached.
See:
P218 = 15
P348 = 15
Complete report attached.
- Attachments
-
- report_0008DC111213-0325192180_2023-03-23_18-26-11.zip
- (5.52 MiB) Not downloaded yet
-
cnckeith
- Posts: 5563
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: 412 MPG1 encoder error on startup
Thanks for that, checking into it.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html