I just bought a CNCEST 3040T 4 Axis CNC machine with the VFD 800w motor.
Set it all up and all of a sudden the Z drive stopped working after initially working. I swapped the Y and Z on the back of the controller and the Z drive works under the Y axis so it is not the stepper motor of the Z axis
I've uninstalled MACH 3, removed the MACH 3 folder and re-installed but still the Z drive does not function.
While I await the seller to contact regarding the issue I'm pondering fixing this and making it better at the same time rather than a return.
Anyone have any ideas what the issue could be?
CNCEST 3040T Z drive issues
Moderator: cnckeith
-
- Posts: 3135
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: CNCEST 3040T Z drive issues
Well, since you posted in the Centroid CNC forum, you are halfway to a solution. The next part of the fix is here: https://centroidcnc.com/
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.