Centroid Community CNC Support Forum

Hey Guys,

anyone have a macro or tutorial on creating a tool change position in fusion 360 ?

no options there in my post processor.



thanks !
Joe

One way is to add manual g-gode in fusion, needs a little PP editing

https://knowledge.autodesk.com/support/ ... M-CAM.html

In this example, it moves to X20 Y20 before the tool change to T6

Uwe

You could also setup a G28 return location and add G28 to the M6 macro. Unless you're wanting to be able to set location based on your design, then what Uwe suggests.

thanks guys!

looks like lots of fun tricks to learn

joe