Page 1 of 1
Custom Tool Change Position
Posted: Tue Feb 28, 2023 3:45 pm
by RaptorMachine
Hey Guys,
anyone have a macro or tutorial on creating a tool change position in fusion 360 ?
no options there in my post processor.
thanks !
Joe
Re: Custom Tool Change Position
Posted: Wed Mar 01, 2023 3:50 am
by suntravel
One way is to add manual g-gode in fusion, needs a little PP editing
https://knowledge.autodesk.com/support/ ... M-CAM.html
In this example, it moves to X20 Y20 before the tool change to T6
Uwe
Re: Custom Tool Change Position
Posted: Wed Mar 01, 2023 11:41 am
by Sword
You could also setup a G28 return location and add G28 to the M6 macro. Unless you're wanting to be able to set location based on your design, then what Uwe suggests.
Re: Custom Tool Change Position
Posted: Wed Mar 01, 2023 2:38 pm
by RaptorMachine
thanks guys!
looks like lots of fun tricks to learn
joe