Page 1 of 1
How to do text
Posted: Fri Feb 10, 2023 8:00 pm
by danno067
What is the best way to program text in intercom? Specifically on a mill.
Re: How to do text
Posted: Fri Feb 10, 2023 9:02 pm
by cncsnw
Draw it in CAD; explode it to lines and arcs; save it as a DXF file; and use DXF Import into Intercon.
Re: How to do text
Posted: Fri Feb 10, 2023 10:13 pm
by tblough
And depending on how you want to engrave it, there are some pretty good single line fonts. The one I use for drag engraving in SolidWorks is DPS Schrift.
Re: How to do text
Posted: Sat Feb 11, 2023 12:18 am
by danno067
Thank you. I will give it a try tomorrow.