tool sheet labeling?

A place to discuss and ask questions about all things Machining for Mills, Lathes, Laser, and Routers

Moderator: cnckeith

Post Reply
Black Forest
Posts: 345
Joined: Thu Nov 23, 2017 1:39 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

tool sheet labeling?

Post by Black Forest »

How can I get my tool sheets to have the same program name and number as the G-code file I am posting? Mine always are labeled tool sheet for program 1001. I have looked in the post processor and other places but I have not found it yet.
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: tool sheet labeling?

Post by suntravel »

fusion360 uses the Program# you have written in SetupX\Post Process for the sheet.

Uwe
Attachments
2023-02-10 12_48_23-david® Client.png
Black Forest
Posts: 345
Joined: Thu Nov 23, 2017 1:39 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: tool sheet labeling?

Post by Black Forest »

Not in mine! I set the program number in the post processor say for example 1111 but my tool sheets always come with 1001.
post screen.jpg
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: tool sheet labeling?

Post by suntravel »

Set the number in the setup for the toolpath, not in the PP setup ;)

This is where the sheet gets the number from, and the PP also.

Uwe
Black Forest
Posts: 345
Joined: Thu Nov 23, 2017 1:39 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: tool sheet labeling?

Post by Black Forest »

OK. That was the problem. Thank you Uwe! I missed you on the forum. :D
Post Reply