Centroid Community CNC Support Forum
https://centroidcncforum.com/
Tool path for fly cutter
https://centroidcncforum.com/viewtopic.php?f=66&t=8184
Page
1
of
1
Tool path for fly cutter
Posted:
Mon Jan 16, 2023 8:38 pm
by
danno067
Is there a way to program multiple passes with a fly cutter? I tried linear but it moves x and z at the same rate.
Re: Tool path for fly cutter
Posted:
Mon Jan 16, 2023 8:39 pm
by
tblough
If you mean in Intercon, then look at the REPEAT command.