Tool path for fly cutter

A place to discuss and ask questions about all things Machining for Mills, Lathes, Laser, and Routers

Moderator: cnckeith

Post Reply
danno067
Posts: 11
Joined: Sun Nov 27, 2022 11:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Tool path for fly cutter

Post by danno067 »

Is there a way to program multiple passes with a fly cutter? I tried linear but it moves x and z at the same rate.
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Tool path for fly cutter

Post by tblough »

If you mean in Intercon, then look at the REPEAT command.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply