Dxf

A place to discuss and ask questions about all things Machining for Mills, Lathes, Laser, and Routers

Moderator: cnckeith

Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Dxf

Post by Filardo »

suntravel wrote: Tue Nov 22, 2022 2:00 pm ITNC 530 can also not read splines form DXF ;)

And if you are complaining about costs, try to buy a new ITCN 530 from Haidenhain :o

Uwe
Pardon si j'ai était vulgaire mais je comprends pas pourquoi avoir option dxf si ont peut rien faire
Ont peut même pas faire un contour extérieur en plusieurs passe
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Dxf

Post by suntravel »

Sure, with Depth Repeat or with Clean Out....

Uwe
Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Dxf

Post by Filardo »

suntravel wrote: Tue Nov 29, 2022 1:19 pm Sure, with Depth Repeat or with Clean Out....

Uwe
vous voulez dire répétition mais pourquoi j'ai deux fois option contour dans dxf
Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Dxf

Post by Filardo »

suntravel wrote: Tue Nov 29, 2022 1:19 pm Sure, with Depth Repeat or with Clean Out....

Uwe
a mon avis un gros problème de traduction en Français du logiciel
Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Dxf

Post by Filardo »

suntravel wrote: Tue Nov 29, 2022 1:19 pm Sure, with Depth Repeat or with Clean Out....

Uwe
ne le prenais pas mal mais je préfère avoir la main mise sur ce que je programme que de passer par fusion 360 et avoir des surprises
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Dxf

Post by suntravel »

Yes the translation is not perfect and not complete ( I tested the german version )

Thats why I use native english, also lots of CNC stuff is only available in english.

I also perfer hand coding or Intercon for simple parts, because I only have pencil sketches most time.

But if I have DXF or STL, I am faster with fusion. Post Processor from Swissi is very reliable. Post and runs for me without problems.

https://centroidcncforum.com/viewtopic.php?f=60&t=2992

Uwe
Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Dxf

Post by Filardo »

suntravel wrote: Wed Nov 30, 2022 12:24 am Yes the translation is not perfect and not complete ( I tested the german version )

Thats why I use native english, also lots of CNC stuff is only available in english.

I also perfer hand coding or Intercon for simple parts, because I only have pencil sketches most time.

Merci pour votre réponse et désolé si je me suis énervé dans mes propos
Mais quand j'ai soulevé la question d une mauvaise traduction du logiciel ont ma dit que c'était des français professionnel qui l'ont fait et que si sa me plaît pas j'avais qua changer les mots
Je ne trouve pas ça normal

But if I have DXF or STL, I am faster with fusion. Post Processor from Swissi is very reliable. Post and runs for me without problems.

https://centroidcncforum.com/viewtopic.php?f=60&t=2992

Uwe
Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Dxf

Post by Filardo »

suntravel wrote: Wed Nov 30, 2022 12:24 am Yes the translation is not perfect and not complete ( I tested the german version )

Thats why I use native english, also lots of CNC stuff is only available in english.

I also perfer hand coding or Intercon for simple parts, because I only have pencil sketches most time.
En plus si je veux le manuel en français je suis obligé de le payer 60eur chez le fournisseur français
Encore une fois ce n'est pas normal il devrait être téléchargeable gratuitement dans toutes les langues

But if I have DXF or STL, I am faster with fusion. Post Processor from Swissi is very reliable. Post and runs for me without problems.

https://centroidcncforum.com/viewtopic.php?f=60&t=2992

Uwe
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Dxf

Post by suntravel »

Acorn is a DIY CNC with a low pricetag for a small market...

To make a complete translation of the UI there are about 7200 lines to translate/edit.
If this should be perfect you need someone how knows all the technical terms in English and the second language.
Lets assume he needs 60h for the job charging 90€/h that is 5400€ per language-

And the manuals are still in English ;)

At the end all users have to pay a lot for translations they do not need. People at Centroid or the dealer can not work for free.

So I am happy the way it is.

But If you want, edit the language file to your liking, or hire someone to do it for you.

Uwe
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Dxf

Post by tblough »

Maybe during one of the upgrade cycles (after Acorn and Servo are unified, of course ;-), the programmers could move all of the I18N stuff into a single file to make it easier to crowdsource translations.

At that point, hopefully, some of the international users could post translations for their native languages.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply