Hello All,
So I am a rookie at most of this CNC stuff but I normally get by. Today I have some G Code developed for a HASS CNC machine and I need to move it to a Centroid mill. I can read and understand the bulk of the code but I have G110 through G113, I assume these to be work offsets for the HASS. Can someone confirm this would be a simple edit to G54 through G57.
Thanks in advance,
PFM Dave
Converting HASS G Code for Centroid Mill
Moderator: cnckeith
-
PFM Dave
- Posts: 18
- Joined: Tue Mar 23, 2021 9:57 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Converting HASS G Code for Centroid Mill
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
tblough
- Posts: 3295
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Converting HASS G Code for Centroid Mill
If you wish to keep the extended WCS numbers, you can use G54 P1 for WCS #7 through G54 P12 for WCS #18.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)