Finally some time to get back to the plasma table and it stops randomly and wont let me restart where it left off. Also normally I dry run to the stop point and finish the cutting when this happens. But today it wouldn't let me turn off dry run when I got to where it stopped. I have no idea why its stopping. I'm hoping the report will show something to someone that knows how to read it.
Thanks for your help.
plasma stoping randomly and cant restart program
-
- Posts: 521
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: plasma stoping randomly and cant restart program
Hey Jerry
I'm not seeing anything to out of normal.
Can you share the G-code so I can try it on my machine?
Restart mode is general is more robust in 5.08 and it might be worth updating.
The next software Version 5.1 will have the Latest Restart mode update that allows for selecting where you would like to jump to in the job. no more dry running to get where you want to be.
I'm not seeing anything to out of normal.
Can you share the G-code so I can try it on my machine?
Restart mode is general is more robust in 5.08 and it might be worth updating.
The next software Version 5.1 will have the Latest Restart mode update that allows for selecting where you would like to jump to in the job. no more dry running to get where you want to be.
-
- Posts: 31
- Joined: Thu Sep 22, 2022 1:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: plasma stoping randomly and cant restart program
Thanks for the reply. I'll try updating. The program stopped at two different spots so I don't think it was the program. The program was a paid for program so it should be good.
Thanks again.
Thanks again.
-
- Posts: 31
- Joined: Thu Sep 22, 2022 1:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: plasma stoping randomly and cant restart program
So 5.08 is a beta?Joey wrote: ↑Wed Jan 31, 2024 7:09 pm Hey Jerry
I'm not seeing anything to out of normal.
Can you share the G-code so I can try it on my machine?
Restart mode is general is more robust in 5.08 and it might be worth updating.
The next software Version 5.1 will have the Latest Restart mode update that allows for selecting where you would like to jump to in the job. no more dry running to get where you want to be.
-
- Posts: 521
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: plasma stoping randomly and cant restart program
5.08 is the current release.
The 5.06 post at the top of the plasma forums is actually linked to the 5.08 release download page.
Did you run the job more than once? Was it stopping in the same places?
The 5.06 post at the top of the plasma forums is actually linked to the 5.08 release download page.
Did you run the job more than once? Was it stopping in the same places?
-
- Posts: 31
- Joined: Thu Sep 22, 2022 1:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: plasma stoping randomly and cant restart program
Thanks for the info on 5.08,
Yes ran program twice, it stopped at two different spots.
-
- Posts: 31
- Joined: Thu Sep 22, 2022 1:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: plasma stoping randomly and cant restart program
Sorry to keep bothering you but I can't find the 5.08 download. I click on the 5.06 at the top and can't see the link.
-
- Posts: 31
- Joined: Thu Sep 22, 2022 1:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: plasma stoping randomly and cant restart program
ThanksJoey wrote: ↑Fri Feb 02, 2024 4:33 pm No problem.
Here it is https://www.centroidcnc.com/centroid_di ... loads.html